Banks Power 13-18 Ram 6.7L Diesel Boost Tube System – Raw Tubes Super Sale

Description

Manufacturer Part # : 25995

Market Description

• Increase flow area up to 103% over the stock 2-3/4″ boost tubes with Banks’ huge 3-1/2″ OEM left and right side boost tubes. Stock hot side tube is dented at the factory, bringing it’s diameter down to a tiny 2-1/4″. Banks boost tubes are 3-1/2″ constant diameter mandrel bent with larger radius bends. More air allows for more fuel which means more horsepower. Banks hot and cold side tubes have up to 103% greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots. Looking for the ultimate flow increase? Banks Boost-Tubes are larger than the factory pipe and designed to work with not only the stock elbow but also the new Banks Monster-Ram Gen 2 which will improve airflow, and allow the turbocharger to spool up even faster.Key Features: 3-1/2″ constant diameter mandrel bent with larger radius bends. Combine with Banks Monster Ram Gen 2 for maximum power. More air allows for more fuel which means more horsepower. Over 73% larger flow area vs stock (3.5in vs 2.75in) (103% larger if you count the OEM dent). 4- and 5-ply heavy-duty silicone couplers. Spring-loaded constant tension clamps. Greater cooling capacity. Perfect fit and finish. Lower EGTs
• Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5 or 4) which will improve airflow, and allow the turbocharger to spool up faster. Banks cold side tubes have 37% greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our natural finish tubes give you the freedom to paint or powder-coat to your color of choice. The bead-rolled ends allow for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots.

Associated Comments

This kit is designed to work with stock elbow or new Banks Monster-Ram (3.5″ or 4″) and the stock intercooler (or aftermarket intercooler with stock inlet and outlet size and location).

Product Description – Extended

• Boost Tube Upgrade Kit, Natural finish (Set) for 2013-2018 Ram 2500/3500 6.7L Cummins
• Boost Tube System; Raw Tubes; 2013-2018 Ram 6.7

Features and Benefits

• Up to 103% greater flow area vs stock. Spools turbo faster with lower EGTs
• Tube Has 2.375 in. Reduction

Product Description – Short

• Banks Power 13-18 Ram 6.7L Diesel Boost Tube System – Raw Tubes
• Boost Tube Upgrade
• Intercoolers

Product Description – Long

Boost Tube Upgrade Kit

AAIA Part Type Description

Intercooler Kit

Product Description – Invoice

Intercooler

“>